1-800-TO-MULTI
Contact Us Sell Us Your Surplus Quote Cart
Multi-Link / Products / Cisco / Wireless / Access Points / AIR-AP1131AG-N-K9
Cisco
Adtran
Brocade
Extreme
Juniper
Nortel
Other
You're Protected

AIR-AP1131AG-N-K9

Lifetime Warranty
AIR-AP1131AG-N-K9
Manufacturer: Cisco
Product ID: AIR-AP1131AG-N-K9
Product Description: 802,11a, ,11g AP, Int Radios, Ants, Non-FCC Cnfg
Shipping: Typically ships within 2-3 days
Warranty: Lifetime Warranty
Any Questions?
1-800-TO-MULTI or Email
Add to Quote Cart
Sell This to MLCP
Pre-owned, used and refurbished Cisco AIR-AP1131AG-N-K9

As a fixed-configuration, dual-band access point, the Cisco AIR-AP1131AG-N-K9 provides omnidirectional coverage with two built in radios. In addition to single-band 802.11g wireless LAN connectivity, the AIR-AP1131AG-N-K9 was designed for offices and similar RF environments. We carry new surplus AIR-AP1131AG-N-K9 access points as well as pre-owned models. Both are available for less than the manufacturer’s distribution chain and both are covered under our standard warranty.

MULTI-LINK proudly offers new and pre-owned Cisco AIR-AP1131AG-N-K9. Request a quote online by adding the AIR-AP1131AG-N-K9 to your quote cart with no obligation to buy! To speak to a live representative who can answer your questions about a new or refurbished Cisco AIR-AP1131AG-N-K9, call 1-800-TO MULTI (866-8584).

In addition to the AIR-AP1131AG-N-K9, MULTI-LINK also provides other Cisco wireless components such as: adapters, access points, antennas, bridges, radio modules, power options and WLAN controllers. In addition to housing a large inventory of new and refurbished Cisco wireless products, such as the AIR-AP1131AG-N-K9, we typically ship same day or within 1-2 days of your order. Let MULTI-LINK be your all-in-one source for new and used Cisco wireless equipment!

We value your business. Prior to shipment, each refurbished AIR-AP1131AG-N-K9 is fully tested to factory specifications to ensure we deliver quality, reliable products to our customers. Every new and used component is backed with MULTI-LINK’S lifetime warranty.

Considering an upgrade? Do you have old networking equipment gathering dust? We’re interested in your surplus AIR-AP1131AG-N-K9 as well as other excess networking equipment. MULTI-LINK encourages you to visit our Investment Recapture Page to learn more about a variety of possible buy-back options designed to maximize your ROI. Then send us your equipment list on our Sell Us Your Surplus form, or call and speak with a representative toll free at 1-800-TO-MULTI (866-8584).

You might also be interested in AIR-AP1042-RK9-5.

General Information
Manufacturer: Cisco
Product ID: AIR-AP1131AG-N-K9
Product Description: 802,11a, ,11g AP, Int Radios, Ants, Non-FCC Cnfg
Product Type: Wireless Access Point
Marketing Information

Cisco Aironet 1131 802.11a/b/g Wireless Access Point provides high-capacity, high-security, enterprise-class features in an unobtrusive, office-class design, delivering WLAN access with the lowest total cost of ownership. With high-performing dual IEEE 802.11a and 802.11g radios, the Aironet 1131 802.11a/b/g Wireless Access Point provides a combined capacity of up to 108 Mbps to meet the needs of growing WLANs. In addition, when running Cisco IOS Software the Cisco Aironet 1131 802.11a/b/g Wireless Access Point supports both access point and workgroup bridge functionality. It avoids interference in congested airspace, simplifying the deployment of high-capacity networks. For smooth migration, the access point takes full advantage of the dual-band capabilities of today's WLAN clients, while providing full backward compatibility for legacy 802.11b clients.

The Cisco Aironet 1131 Wireless Access Point delivers optimal value for offices and similar environments. Built-in antennas provide omnidirectional coverage specifically designed for today's open workspaces. A multipurpose mounting bracket easily secures the access point to ceilings and walls.

Technical Information
Wireless LAN Standard: IEEE 802.11a/b/g
ISM Band: Yes
UNII Band: Yes
ISM Minimum Frequency: 2.40 GHz
ISM Maximum Frequency: 2.40 GHz
UNII Minimum Frequency: 5.15 GHz
UNII Maximum Frequency: 5 GHz
Total Number of Antennas: 2
Antenna Gain: 4.5 dBi
Antenna Type: Omnidirectional Antenna
Indoor Antenna Range: 460 ft
Outdoor Antenna Range: 950 ft
Wireless Transmission Speed: 54 Mbit/s
Wireless Security:

Authentication:

  • 802.1X support, including Cisco LEAP, EAP-Flexible Authentication via Secure Tunneling (EAP-FAST), Protected EAP- Generic Token Card (PEAP-GTC), PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAPv2), EAP-Transport Layer Security (EAP-TLS), EAP-Tunneled TLS (EAP-TTLS), and EAP-Subscriber Identity Module (EAP-SIM) to yield mutual authentication and dynamic, per-user, per-session encryption keys (WPA and WPA2)
  • MAC address and standard 802.11 authentication mechanisms

Encryption:

  • AES-CCMP encryption (WPA2)
  • TKIP encryption enhancements: key hashing (per-packet keying), message integrity check (MIC) and broadcast key rotation via Cisco TKIP or WPA TKIP
  • Support for static and dynamic IEEE 802.11 WEP keys of 40 bits and 128 bits
Interfaces/Ports
Ethernet Technology: Fast Ethernet
Management Port: Yes
Management & Protocols
Management:
  • Telnet
  • Console port
  • Simple Network Management Protocol (SNMP)
  • Trivial File Transfer Protocol (TFTP)
  • CiscoWorks Resource Manager Essentials (RME)
  • CiscoWorks Software Image Manager (SWIM)
  • CiscoWorks Campus Manager
  • CiscoWorks WLSE
  • CiscoWorks CiscoView
Power Description
Input Voltage: 110 V AC
  220 V AC
Physical Characteristics
Form Factor: Wall Mountable
  Ceiling Mountable
Height: 7.5"
Depth: 1.3"
Weight (Approximate): 1.50 lb
Miscellaneous
Package Contents:
  • Aironet 1131 802.11a/b/g Wireless Access Point
  • Cisco Aironet 1130AG Series Power Module (universal power module)-optional
  • Quick Start Guide: Cisco Aironet 1130AG Series Access Point
  • Safety Warnings for Cisco Aironet 1130AG Series Access Points
  • Cisco product registration and Cisco documentation feedback cards

Mounting hardware kit:

  • One mounting plate
  • Two suspended ceiling adjustable T-rail clips (accomodates standard and recessed T-rails)
  • One security hasp adapter
  • Four 6 x 32 x ¼ in. flat head Phillips machine screws
  • One 8 x 32 x 3/16 in. pan head Phillips machine screw
  • 2 #8 plastic wall anchors
  • 2 #8 x 32 x 1 in. pan head screws
Additional Information:

System Memory:

  • 32 MB RAM
  • 16 MB FLASH
Certifications & Standards:
  • Wi-Fi

Safety:

  • UL 60950-1
  • CAN/CSA-C22.2 No. 60950-1
  • UL 2043
  • IEC 60950-1
  • EN 60950-1
  • FIPS 140-2 Pre-Validation List
  • Common Criteria

Radio Approvals:

  • FCC Part 15.247, 15.407
  • RSS-210 (Canada)
  • EN 300.328, EN 301.893 (Europe)
  • ARIB-STD 33 (Japan)
  • ARIB-STD 66 (Japan)
  • ARIB-STD T71 (Japan)
  • AS/NZS 4268.2003 (Australia and New Zealand)

EMI and Susceptibility (Class B):

  • FCC Part 15.107 and 15.109
  • ICES-003 (Canada)
  • VCCI (Japan)
  • EN 301.489-1 and -17 (Europe)

Security:

  • WPA2
  • WPA
  • 802.11i
  • 802.1X
  • AES
  • TKIP
  • FIPS 140-2 Pre-Validation List
  • Common Criteria (when running Cisco IOS software)

Other:

  • IEEE 802.11a
  • IEEE 802.11b
  • IEEE 802.11g
  • FCC Bulletin OET-65C
  • RSS-102

You might also be interested in:

AIR-SAP702I-R-K9

AIR-SAP702I-R-K9

802.11n Standalone 702, 2x2:2SS; Int Ant; R Reg Domain		 Learn More
AIR-CAP3602I-T-K9

AIR-CAP3602I-T-K9

802.11n CAP w/CleanAir; 4x4:3SS; Mod; Int Ant; T Reg Domain		 Learn More
C9115AXI-D

C9115AXI-D

Cisco Catalyst 9115AX Series Cisco Catalyst 802.11ax AP; Internal Antenna; 4x4:4 MIMO; BT 5; mGig; USB; -D Domain		 Learn More
Multi-Link Communications Products: 1-800-TO-MULTI
Copyright © Multi-Link Communications Products. All rights reserved. NS2016